Modular trellis / lattice / plant support

Needed to hold up my plant as it was growing. Modeled this to be modular, can get bigger, wider, whatever.

No supports are needed.

Print the spikes vertically, unless you have a super sticky print surface, print them with wide brim.

Everything should fit together tightly. Plan out how you'll put it together first, I haven't had good luck taking it apart after fitting it together.

You can find the pot in the photo at https://www.printables.com/model/353930-pot-losical-v1-by-brejou-thierry printed in Prusament Orange PETG.

Category: Outdoor & Garden