Laowa Aurogon Supports - Cross base.

Supports for the Laowa Aurogon lens with a cross base. Initial Design and Prototyping by Allan Walls. Fusion 360 by me.
1
34
0
149
updated October 15, 2023

Description

PDF

These supports are designed to have quick release plates attached to the bottom. 
The underside of the QR clamps should have a ‘cross’ recess. The base of the tube clamps have a cross to fit the recess.
You will need 2 70mm clamps and one of the remaining at minimum.
There is 3.2mm space for neoprene tape between you lens and the clamp.

Recommended print settings:

Perimeters = 4
Layer Height = 0.30

Model origin

The author marked this model as their own original creation.

License