Laowa Aurogon Supports - Flat base.

Supports for the Laowa Aurogon lens with a flat base. Initial Design and Prototyping by Allan Walls. Fusion 360 by me.
0
31
0
139
updated October 15, 2023

Description

PDF

These supports are designed to have quick release plates attached to the bottom. 
You will need 2 70mm clamps and one of the remaining at minimum.
There is 3.2mm space for neoprene tape between you lens and the clamp.


Recommended print settings:
Perimeters = 4
Layer Height = 0.30
 

If you want to drill the bottom to fix alignment, use your slicer to set the area on the foot (where you will drill) to 100% infill.

Model origin

The author marked this model as their own original creation.

License