Sunlu FilaDryer Filament Dryer S2 PTFE Adapter

With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easy removable.

You need to remove the small tube part in one of the holes of the FilaDryer to have a better angle of the PTFE tube into the dryer, just push it out. 

You need the following parts.

• 1x PC4-01 Bowden Connector
• A piece of heat-resistant double-sided foam tape (3M VHB is recommended).