Berd-Air Suspension Mount With Filter

Requires

• M3 Screws 8mm , 16mm
• M3 Washers
• Extension springs  (Ø6mm x 10mm )
• Small nail or needle for filter hinge.
• Foam cubes 20x17x19mm
• M2 Heat Set Insert for Air Filter https://www.amazon.ca/gp/product/B093327KXJ
• M3 Heat Set Insert for the Mount https://www.amazon.ca/gp/product/B093327KXJ

Pro Tip:

If you don't want to pump hot air to your parts cooler (Because it is compressing air), run the air through a radiator to cool it back down to room temperature.