Lovley Pumpkin

i made this little pumpkin some years ago to put a flickering LED inside.

Every year am print some of them as giveaways for friends. Now you can print them on your own. you can add a LED with a CR2032 Buttoncell with a socket and a small switch and glue them on the Top-part.

I printed them mostly in PLA and finishing the surface and airbrushed them. Now I made one in orange PETG. I recommend PLA because of the easier removing of the support.

Printed on MKS3+ and Makerbot Replicator2(years ago) in 0.2 and 0.1mm Layerheight

Have fun and happy printing. 

and do not eat too much sweets… ;-)