OpenSourceEV Seat Back Hanger for Rivian R1T & R1S

OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no cost. We're committed to enhancing the Rivian Owner community and promoting 3D printing through our natively open approach. 

If you are considering purchase a Rivian R1S or R1T, you can both get $500 worth of Rivian Gear, 6 months of free RAN charging, and support our mission of making Open Source enhancements for them by using our Rivian Referral Rewards code - ROBERT1265188. You enter this code when putting your deposit down on your Rivian. Details are available here.

+++

The OpenSourceEV Seat Back Hanger for the Rivian R1S and R1T is an unobtrusive, easy to install / remove, way for hang something on the back of your front seat without damaging the OEM hook surround. The mount assembles quickly with one Phillips head screw and a specialized low-profile T-nut. Installation is simple as it just hangs on the hook mounted on the rear of the R1S and R1T front seat.

The hook has around 35MM of hanger space on it and a maximum capacity of 5 lbs.

You'll also need the following additional parts:

• 1 x Steel Phillips Flat Head Screws, M5 x 0.8 Mm Thread, 25 MM long (McMaster Carr 91420A330)
• 1 x Low profile T-Nut

Available for purchase here: https://opensourceev.com/products/seat-back-hanger
Additional needed parts available here: https://opensourceev.com/collections/replacement-parts

Discuss here: https://www.rivianforums.com/forum/threads/new-opensource-ev-parts-seat-back-hanger.19916/

Updated the design to use a hanger instead of a ball mount tablet holder.

Mount now supports 1" felt pad for those who believe they need it.