Self Watering Herb Planter

Here, I have made a self watering herb plant pot, to keep herbs fresh for longer. It is printed in 2 parts, a top and bottom. It's simple to use, all you need to do is put what ever you want in the top part, and fill the bottom with water using the hole. You can't over water the plant, so you can't go wrong.

As you can see there are several files. One set have a curve, the others don't chose what you like. In the pictures I used the ones with curves, just because I liked the look more. Just make sure you print one top, and one bottom from the same set.

There is no need to print with supports, because the overhangs have been chamfered. 

Hope you guys find this useful!