Open Source Hardware Logo

Hi,
here is the open source hardware logo. It's printed without top or bottom Layers so the gyroid infill (5%) is visible.

I really love the idea of open source (hardware) and wanted to display this. I took the logo (.svg) from the official page (link below) and imported it to Fusion360. My Fusion360 and sclic3r files are attched.

Feel free to leave me some feedback and please let me see your prints.

Design:

The Logo is taken from the official open source hardware association Homepage (Link below). I just removed the letters from the logo with inkscape and loaded it to Fusion360.

Logo source:
https://www.oshwa.org/open-source-hardware-logo/

inkscape:
https://inkscape.org/de/

Print Settings

Resolution: 200 µm

Infill: 5%
Filament: Eryone PLA Silk silver 

Notes: printed on Prusa Mini