Bambu (x1p1) smart poop chute

This poop chute does not require any exact magnets or anything like that but all the items you need should be in your stock if you own a bambulabs printer.

REVISON 1.1 FILES NOW AVAILABLE (25th oct 2023)
check following change-log and re-print for better results

This is currently a prototype as its not 100% perfect.already have some improvements for next version that will be adjusted soon. I would also love to get some feedback from you - please post a make and your opinion when tested. If you think its worth some support i appreciate every donation.

If your interestd in the process of this: Check my 3d-printing instagram account.



The special:
-Very space saving design. The box can be pulled forward so that there needs to be only about 70mm of space to the side of the printer.
-No new exact parts are used that you have to buy.
-The fill level of the box is easy to see.
-The box can be easily gripped.
-Compfortable emptying of the box even in small bags.
-Appealing design

Changelog:
Rev 1.0
- basic files
Rev 1.1
-optimized ramp for less chance of clog
-added a cover for the ramps notch on the back - less chance of clog
-optimized ramp for x1 printers
-optimized bucket to store ~3x more poop b4 need to emptying.

The ramp and box are printed from PLA (Or other hard plastics). To assemble, replace two housing screws on the back, the new screws are included in the spare parts to the printer (spare extruder screw & spare scrapper screw), see pictures.

The printing parts both fit on one printing plate or can be printed separately from one another to use different colors. The models are printed with little tree support (only on printplate).

Tip: Use a double sided tape to stick the ramp to the back of the printer when screwing. This reduces the likelihood of vibration.