Sloth - MMU

This is a multicolor three color print for your MMU of a cute sloth stting down, perhaps in a tree, with his legs curled and arms curled up. The .3mf is already painted with the three colors that you can use.  You might consider a brown sloth or a gray sloth, or really any color. The eyes and nose are black and the body is a darker color and the face/hands/feet are a lighter color.

I designed these guys so they all print in about an hour and are around 30mm tall. The plate here has six on it and with a .2 layer height that is a reasonable 122 tool changes using three colors in six hours and 16 minutes. Use 2 perimeters and 15% infill.

Spool 1 -  Eyes, nose, mouth (black)

Spool 2 - Main body color (dark brown or dark gray)

Spool 3 - (unused)

Spool 4 - Claws, face (light brown or light gray)