Parametric Round Item Storage (Coins/Tokens/Camera Filters etc..) with text label

I love found this round item storage box exceedingly useful, but I made a couple tweaks to (in my opinion) improve the design. 

First I tweaked the sides of the box so that it consumes less plastic while still providing full coverage. 

I also added a text layer to the top of the box that embosses text so that you can label the top.

To edit the sketch in Fusion 360:

• Expand the Sketches folder and go to Sketch 7
• Right click on the sketch and select Edit Sketch
• Click inside the text to highlight it dark blue
• Right click and select Edit Text. 

I printed the top and bottom at the same time with the color change and that makes the slight base extension also print in the alternate color, giving it a nice finish. 

You may have to play with the spacing on the text depending on the size of the case you're printing.

Added a text label to the top of the box and modified the sides to cut up higher, and thus consume less plastic/time when printing.