Small hypercube, easy to print with supports.
I tried to make a small 1" cube, and it kind of worked (see the 2nd photo), but I wouldn't recommend it.
I usually print this with a raft or a brim since there's not much touching the build plate.
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.3mm
Infill:
10%
Notes:
I used a raft since the supports are thin. Prints well, but takes a long time. 3in (75mm) seems to be a good size, although 2in may work.
Category: Math ArtThe author marked this model as their own original creation. Imported from Thingiverse.