Model 7: Buggy is 3D printable set of parts for your 3d printer. The model is approx. 56 cm long (1:8 scale) and is ready for your RC equipment. You can buy this model on www.3dsets.com
3D Sets BeltDrive – the new transmission solution is durable, simple, and quiet because it uses timing belts. It allows the use of both cheap brushed and powerful brushless motors.
Easy maintenance – the front and rear axles are attached with just a few screws and can be very easily removed from the model. An integral part of the rear axle is the transmission with engine and ESC – the entire drive system can be removed from the body in one movement.
Easy-to-disassemble – Metal nuts are now embedded for repeatedly disassembled or stressed joints. Removing the axles is now much more convenient.
Double Wishbone suspension – independently suspended front axle wheels with sophisticated wheel geometry. The axle can be mounted in 3 different height positions and the mounting of the shock absorbers can also be adapted. The axle uses a system of fully printed 3D Sets ball joints and is optimized for higher impact resistance.
The rear swing axle uses an innovative way of transmitting driving force by means of a swinging pulley, is adjustable to 3 height positions and dampers of various lengths can be used.
Truly functional 3D printed door handles – not for show, but prevent the door from opening while driving. Safety first!
The protective roll cage in the interior complements the sporty character of the Buggy, but it also really reinforces the model’s body.
Preparation for the functional lights – the lights have prepared cavities for LED diodes, cable glands are prepared in the model.
Possibility to install the G-T Engine Sound System sound module – selection from 58 engine sounds. The module has a reserved space behind the front seats.
Highly detailed model of the engine – the engine covers the moving parts of the gearbox and it is possible to experiment with color by changing the filament during printing.
Innovative battery box with easy opening with rotary locks, easily accessible from the bottom of the model.
Many new details – e.g. realistic emboss on the inner parts of bodywork, fuel tank in the trunk, and more.
Model origin
The author marked this model as their own original creation.