Nomad PinePower MagSafe Adapter

The PinePower Desktop does have a built-in Qi charger, but it never worked right for me. This adapter/spacer allows me to repurpose the space. The top of the PinePower isn't flat so this accounts for that. It also spaces the MagSafe charger away from the Qi coil so the Qi coil doesn't try to activate.

The best way to print this is probably face down with supports at the halfway point of whichever direction your slicer is bridging. You may need a brim to keep everything firmly attached to the build plate.

The underside of this is not flat and has some curves, so supporting the print that way probably won't work very well. 

The PinePower is not actually a square, so this only works in the pictured orientation.