Adjustable E3D V6 / Volcano Layer Fan
A collaboration between thatch and myself. A lightweight layer fan that fits both E3D V6 and Volcano length heater…
3
34
0
306
updated
October 10, 2023
Description
PDFA collaboration between thatch and myself. A lightweight layer fan that fits both E3D V6 and Volcano length heater blocks. Inspired by Tom114's remix of Prusa MK2 fan.
Everything should print without supports, however there is a trap nut on the blower bracket that may require them for your machine. The blower bracket can be slid up and down along a half dovetail to the desired height before tightening into place.
Requires:
- 50mmx15mm radial fan
- E3D cold zone fan and plastite screws
- (1) M3x35mm cap head screw (longer can work)
- (1) M3x20mm cap head screw (longer can work)
- (2) M4x20mm screws for the blower
- (2) M3 nuts
Print Settings
Printer:
Prusa MK2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3 or better
Infill:
25%
Notes:
ABS or PETG recommended as this sits pretty close to the hotend.
How I Designed This ===================Onshape
Category: 3D Printer PartsTags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
