FOUR COLOR - HueForge Stormtroopers multicolor

Optimized for those with 1 AMS or who want to use less colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyTerra Muted White Transmission Distance: 0.5
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Charcoal Black
    At layer #19 (1.6mm) swap to Muted White
    At layer #51 (4.16mm) swap to White for the rest.