Flexi Shark & Hammerhead Set

This set allows you to make two types of flexi sharks: common shark and hammerhead shark.

Print in Place with no supports. Easy to assemble by simply fitting the nut and bolt parts.

Please take pictures of your Flexi and share them with us!

Print Settings

Printer Brand: QIDI

Printer:  S-Box

Rafts: No

Supports:  No

Infill: 15-20%

Filament: Gnvtntp PLA 

What's Dual Flexi?

"Dual Flexi" is a new type of model that adds recombinant elements to the existing "Flexi" and "articulated" models.

Since they are interchangeable with screws, you can customize your own FlexSeeds by combining them with models from the same series.

It can also be disassembled and stored when no longer needed, so it takes up less space.

Preparation

Nuts will vary in accuracy depending on your 3D printer, software settings, and filament.

Please refer to the list below to test print the corresponding numbered nut and check the tightness with the bolt.

High(Layer Height:0.1mm) 1-3

High-Mid(Layer Height:0.15mm) 3-5

Middle(Layer Height:0.2mm) 5-7

Use numbered nuts that are lightly tightened and overlap in the same position.

If the nut is needed again, 3D print it under the same conditions.

Before fitting the nut/bolt into the FLexSeeds body, remove the back support (two lines) with a tool such as nippers.

Warning

Be careful in environments with young children and pets!

This model contains small parts.

If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.

If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.

In addition, debris from damage to the model may be accidentally ingested by infants or pets.

If the model is damaged, dispose of it immediately.

Store them in an appropriate place.

After 3D printing, store the model in an appropriate place out of reach of young children and pets.

Proper adherence to the precautions will ensure safe use of the model.

Category: Toys & Games