The Ultimate Silica Desiccant Box - Fully Printable

I wanted to create a high capacity, 100% printable box for storing bulk silica gel desiccant. A lot of the designs I looked at required extra hardware, were too small, and had holes too big for the smallest gel beads. I designed this with 1.5mm slots so even the smallest 2mm gels will not fall through the cracks.

This box lowered the humidity in my dry box from 48% to 16% in just a few hours. I plan to use a strong tape to attach this to the underside of my dry box lid, which is why I left the bottom of the box solid.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

100% for screws/top, 20% for bottom box.

Filament: Atomic PLA White Post-Printing =============

I would recommend putting the screws in while the box is empty, as the first rotation requires a little extra force. Once you've inserted the screw once the second time is much easier. rnrnFill with any bulk silica gel. I used this one: http://a.co/d/gj187i4