Flutter Board Game Traveller and Parent Peg

1970's Flutter Board Game by Spears - Replacement Traveller & Parent Pegs (print in whatever color you've lost). - For those who haven't played flutter before, you are sadly missing out on a fantastic board game! As we'd lost the traveller peg sometime over the past year or two, I thought why not make a replacement one since I have a 3d printer anyways and besides, i was not able to find any replacement pieces online for it anyways.

You may need to ream out the top hole of the parent peg so that the two pegs slide cleanly into each other depending how well tuned your printer is. On my ender i did not have to, but when I test printed on my Chiron i did have to slightly ream it out so the pieces didn't bind and snap off the traveler peg's small leg (can you guess how i found out ;) ).

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Infill:

80 - 100

Filament:

any Post-Printing =============

Minor reaming of the top hole of the parent peg may be needed depending on your printer settings. my ender i didnt have to ream out the hole slightly but when I printed one on my chiron i did.