HueForge AT-AT Walker (All Terrain Armored Transport) multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
 

PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Grey Transmission Distance: 1
PLA PolyTerra Muted White Transmission Distance: 0.5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA PolyLite White Transmission Distance: 5.2
PLA PolyLite Starlight Mercury Transmission Distance: 2.5

Swap Instructions:
 

Start with Black
At layer #13 (1.12mm) swap to Orange
At layer #25 (2.08mm) swap to Grey
At layer #27 (2.24mm) swap to Muted White
At layer #39 (3.2mm) swap to Ice Blue
At layer #40 (3.28mm) swap to White
At layer #47 (3.84mm) swap to Starlight Mercury for the rest.