Witch's Spire in the Moonlight

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.3mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Natural Transmission Distance: 21
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #5 (0.46mm) swap to Natural
At layer #22 (1.14mm) swap to Azure Blue
At layer #26 (1.3mm) swap to Lemon Yellow
At layer #33 (1.58mm) swap to White for the rest.