HueForge Darth Vader red circular

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Matte Dark Blue Transmission Distance: 1
    PLA PolyTerra Army Red Transmission Distance: 0.3
    PLA PolyLite Pro Metallic Blue Transmission Distance: 0.3
    PLA PolyTerra Pastel Watermelon Transmission Distance: 1.5
    PLA PolyLite Wine Red Transmission Distance: 1
    PLA PolyLite White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Dark Blue
    At layer #15 (1.28mm) swap to Army Red
    At layer #17 (1.44mm) swap to Metallic Blue
    At layer #20 (1.68mm) swap to Pastel Watermelon
    At layer #26 (2.16mm) swap to Wine Red
    At layer #29 (2.4mm) swap to White for the rest.