HueForge Kylo Ren multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyLite Wine Red Transmission Distance: 1
    PLA PolyTerra Pastel Peach Transmission Distance: 5
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #24 (2mm) swap to Charcoal Black
    At layer #35 (2.88mm) swap to Wine Red
    At layer #39 (3.2mm) swap to Pastel Peach
    At layer #57 (4.64mm) swap to White for the rest.