HueForge Darth Maul multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyTerra Army Red Transmission Distance: 0.3
    PLA PolyLite Wine Red Transmission Distance: 1
    PLA PolyLite Red Transmission Distance: 1.5
    PLA PolyLite Orange Transmission Distance: 7.5
    PLA PolyLite Pro Pink Transmission Distance: 2.5
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #30 (2.48mm) swap to Charcoal Black
    At layer #46 (3.76mm) swap to Army Red
    At layer #49 (4mm) swap to Wine Red
    At layer #51 (4.16mm) swap to Red
    At layer #53 (4.32mm) swap to Orange
    At layer #57 (4.64mm) swap to Pink
    At layer #59 (4.8mm) swap to White for the rest.