HueForge Chewbacca multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Army Brown Transmission Distance: 0.3
    PLA PolyLite Brown Transmission Distance: 0.5
    PLA PolyTerra Earth Brown Transmission Distance: 0.3
    PLA Kexcelled Chocolate Transmission Distance: 1.4
    PLA PolyLite Orange Transmission Distance: 7.5
    PLA PolyTerra Wood Brown Transmission Distance: 0.3
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #25 (2.08mm) swap to Army Brown
    At layer #36 (2.96mm) swap to Brown
    At layer #37 (3.04mm) swap to Earth Brown
    At layer #38 (3.12mm) swap to Chocolate
    At layer #40 (3.28mm) swap to Orange
    At layer #44 (3.6mm) swap to Wood Brown
    At layer #46 (3.76mm) swap to White for the rest.