HueForge Death Star multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyTerra Fossil Grey Transmission Distance: 0.3
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Charcoal Black
    At layer #14 (1.2mm) swap to Fossil Grey
    At layer #24 (2mm) swap to Gray
    At layer #36 (2.96mm) swap to White for the rest.