HueForge Boba Fett helmet multicolor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyTerra Army Blue Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Polymaker Teal Transmission Distance: 0.5
    PLA PolyTerra Pastel Peach Transmission Distance: 5
    PLA PolyTerra Pastel Peanut Transmission Distance: 0.5
    PLA PolyLite Starlight Mercury Transmission Distance: 2.5
    PLA PolyLite White Transmission Distance: 5.2

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Charcoal Black
    At layer #16 (1.36mm) swap to Army Blue
    At layer #18 (1.52mm) swap to Blue Gray
    At layer #21 (1.76mm) swap to Polymaker Teal
    At layer #22 (1.84mm) swap to Pastel Peach
    At layer #39 (3.2mm) swap to Pastel Peanut
    At layer #42 (3.44mm) swap to Starlight Mercury
    At layer #50 (4.08mm) swap to White for the rest.