Esun Ebox Lite silent fan Mod

Hi guys, 

My Ebox Lite was vibrating and making a lot of noise. so I replaced the fan with a 24v hot-end fan (30x30x10 24v) I had lying around. I made a spacer for the fan to slide into and then into the original fan bracket. Plus it has a grill! 

• Easy to print
• Very little filament needed
• Works really well. 
• Takes about 5min to print. 
• Built-in Grill Design
• Notches to hold fan in place
• no glue or tape is needed with v2

Update, V2 has mounting grooves for the fan so no glue or double-sided tape is needed. 

Way quieter, the vibrations are non-existent.