Feather Flag Connector

This is a TPU printed piece that connects a ½" piece of CPVC to the top of a piece of ¾" EMT Conduit for the 15' feather flags.

Print the piece as it stands and you should need no supports.

You will use a full 10' piece of EMT conduit and a 6-7' piece of ½" CPVC. You will need to shorten the CPVC from the 10' that you get it to between 6 and 7 feet. If you can get ahold of a 20' piece of CPVC then you can split it into 1/3rds.

Designed by Free.