It's Edgar!

It's Edgar! Quite possibly the ugliest Halloween fridge magnet, key hook and general desk companion the world has ever seen. 

This model includes Edgar himself and his eyeball. For the eyeball, I suggest printing it lowered slightly below the printing mat so that it has a flat base. That'll improve bed adhesion. I've also included two inserts: a (10mm X 2mm) magnet insert if you plan to use Edgar on a metallic object and a (#6) screw insert if you plan to stick him up on your wall. 

He looks magnificently horrifying straight off the print bed, but Edgar is a flamboyant … thing … so I highly recommend slapping on a few extra colors. Rub a sharpy over his bumps for quick and easy contrast, or if you are feeling fancy, give him a quick dry brush with some acrylic paint or rub 'n buff. Decorate his eyeball with a sharpie, a dollop of paint, or (if you are going all out) a dollop of black JB Weld. 

This model is free to adapt. All I ask is that you drop me a review to share your version of Edgar in all his glory. And if he gives someone a jump scare, please let me know that too. :)

If you like Edgar, I'd really appreciate it if you buy me a coffee. 

Thanks, and happy Halloween!

If you have an active seller license you can sell this print. However, you are not permitted to sell the files. 

Notes:

• Tree supports are highly recommended. 
• Take your time unsticking Edgar from the print bed. He's fiddly.
• The underside of Edgar has a rectangular void you can remove with cutters or tweezers. 
• For best results, print him at fine resolution.