Wall mounted keys and masks hook*

Wall mounted keys and masks hook*

'* and for everything else, as you like :)

I needed a small hook next to my door to organise my keys and the arduous mask. I saw something similar on Am*zon for jackets.

Mounting Video: 

There are 3 parts:

1)KeyMaskHolder_Template.stl => use this to align the screws, screw them in the wall so that the template can be removed with a slight bit of resistance

2)KeyMaskHolder_Base.stl => The main part

3)KeyMaskHolder_Peg.stl => The pegs, slide them in from the bottom. They should fit very tight.You need 5 pegs

2 Screws are required (I used 3,5 x 20 Screws, flat head)

Notes: 

Printed with 3 perimeter

Post-Printing

Step 1

Instert the Pegs from below. Some litte force is needed ;)

Step 2

Use the template to find the desired position. Screw the screws in, assure they have a tight fit. Thereafter remove the template

Step 3

Slide the hey hook onto the screws