Extruder Visualizer Wheel with Arrow

Extruder visualizer for Prusa i3 MK3S+ etc., requires 8x3mm magnet

19m

1× print file

0.20 mm

0.40 mm

3.00 g

updated October 8, 2023

Description

Wheel with arrow visualizer. Tested and works fine in PLA or PETG. Requires a 8mm diameter, 3mm thick neodymium magnet.

Glue optional, but you might need another magnet to remove the magnet when pulling out the visualizer.

3mf/gcode files have concentric top and bottom fill for a nice looking pattern.

The author marked this model as their own original creation.