Supports for kitchen furniture.

For this project you need:

• 8 wood screews 4 x 40 mm (4 screws for each kitchen_furniture_reinforce)
• 1 threaded rod M8 long enough to cover the entire furniture.
• 4 hex nuts M8 (a good option is to use a friction nut)
• 4 flat washers, external diameter 17 mm maximum and internal diameter 8,4 mm
• 2 or more wood screws 4 x 20 ( 2 screws for each angular support)

The kitchen_furniture_reinforce proprieties:

• Designed to work with socket wrenches.
• Symmetric about the x-z plane.
• inclined surface to drain water drops. (you can easly change this feature editing the f3d/step file.)
• need supports.

The angular supports is a general purpose support, you can use to create/repair a shelf (last updated photo) that could be inside a generic cupboard.

Print instructions

The angular supports:

• Layer height 0,30 mm 
• 4 perimeters
• 25% infill
• No supports
• PLA or PETG can be fine

The kitchen_furniture_reinforce:

• Layer height 0,30 mm
• 5 or 6 perimeters
• 20% infill
• supports from the bed
• PETG is more recommended

For all printing info you can check the .3mf files.

Comments

I created this project three years ago after my piece of furniture broke, in all these years this repair has never broken, I'd say it has passed some tests :D.