Depressed little lamp

This articulated 4-piece lamp can be printed on any printer with a minimum build area of 150x150x150mm and the electronics and screws for it should be available at your local hardware store.

Print list:

1x Base

1x Neck

2x Leg

BOM Amazon:

1x E14 holder (https://www.amazon.com/Practical-Holder-Plastic-Pendant-Socket/dp/B07CQK9QXB/ref=sr_1_13?ie=UTF8&qid=1527141028&sr=8-13&keywords=e14+holder)

1x M10x20 threaded nipple (https://www.amazon.com/Practical-Holder-Plastic-Pendant-Socket/dp/B07CQK9QXB/ref=sr_1_13?ie=UTF8&qid=1527141028&sr=8-13&keywords=e14+holder)

1x Cord with switch (https://www.amazon.com/Practical-Holder-Plastic-Pendant-Socket/dp/B07CQK9QXB/ref=sr_1_13?ie=UTF8&qid=1527141028&sr=8-13&keywords=e14+holder)

1x Lamp shade of your choice (https://www.amazon.com/Practical-Holder-Plastic-Pendant-Socket/dp/B07CQK9QXB/ref=sr_1_13?ie=UTF8&qid=1527141028&sr=8-13&keywords=e14+holder)

3x M5x30 screws of your choice.

3x M5 wing nuts or other nuts of your choice.

BOM Sweden (Clas Ohlson):

1x E14 holder (https://bit.ly/2s9q3sD)

1x M10x20 threaded nipple (https://bit.ly/2KOmAaz)

1x Cord with switch (https://bit.ly/2GK4lkq)

1x Lamp shade of your choice (https://bit.ly/2LsE6SX)

3x M5x30 screws of your choice (https://bit.ly/2KP6ZYk)

3x M5 wing nuts or other nuts of your choice (https://bit.ly/2s3ivsm)

Print Settings

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

10-15%

Notes:

I've printed all parts without support in the orientation that they are uploaded in. If you are a perfectionist, you could print the base with supports FROM BUILDPLATE ONLY so the filleted joints for the legs has support.rnrnIf you print with support everywhere your slicer will most likely fill the horizontal hole at the bottom of the base with supports.

How I Designed This

NOTErnThe original design of the lamp is from a picture that has been floating around the internet for a long time and I just made a printable version of it.rnI have tried to find the origin of the picture but to no avail, so if you are the original creator or know anything more about the picture, please let me know.