Magnetic Rods for anycubic linear plus

Update 7-march 21 :

Just added a new version shorted with 10mm width between magnet.

Just a expiremental test, i'm try to print my own rods to accommodate 10x5mm magnets.

I know that for a delta kinematics acuracy its very, ..very import to have all the rods exactly with the same dimension in a milimeter scale. Special each pair of rods should be exactly the same. However I notice that the original rods dimenstion is not particular accuraded.

For that reason i'm trying to create my own rods. I'm run a couple of tests to see if it will be usable. I know that will some variances in printed part dimensions, due the fact that is a 3D printed part. However as i mention the original ones have also some variances in since (not to mention the play of the eye ball bearing)

I try some version but

Specs :

• 267mm lenght
• 10x5mm magnets (N52)
• 10mm mag balls

Print Settings

Printer Brand:

Anycubic

Printer: 

Kossel

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

20

Filament:

PolyMaker PLA 
 

Notes: 

I've design it to be printed with a 6x wall line.

Category: 3D Printer Accessories