The reliable Original Prusa MK4S is now available in discounted bundles with the MMU3 and Enclosure. Grab yours today!

FATES END - DICE TOWER - FREE WIZARD TOWER!

πŸ”—MMF: bit.ly/FatesEndTribe πŸ”—PATREON: bit.ly/FatesEndPatreon Designed for 20mm dice at 100% scale
703
2778
108
12 k
updated June 22, 2024

Description

PDF

By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items. β€’ πŸ”—MMF: bit.ly/FatesEndTribe πŸ”—PATREON: bit.ly/FatesEndPatreon β€’ While you're at it, check out Furhaven: bit.ly/FurhavenGame
════════════════════════════════════
EASY TO PRINT! Our files are designed to be 3D Printed easily without supports! (Supports are the WORST!) Due to the nature of miniatures, our miniatures & ornaments are pre-supported if needed!

Most FatesEnd files are designed to fit on a 7"x7"x7" print bed area or larger! All dice towers are designed to work with standard 20mm dice at 100% scale. (*Dice set/tower scales are determined by the size of the D20 in the set.) If you need to scale the files, you may use the Dice Scale Chart found here: fatesend.net/resources
 

 

Update 5.4:

1) Fixed peg issues (some were too tall or too large when printed small)
2) Changed details on small side "gazebo/balcony" so dice stay put in this spot
3) Fixed hole puncture on roof
4) Fixed detailing around bottom of tower (no indented lines)
5) Added support geometry for hole insertion point on roof - holes developed here on smaller prints (60% or so.)
6) Added all tray options - Dice Holder tray will be textured, but it's ready for print testing now for fitting/dice holding.

Update 4.1: Increased spire thickness below moon for better strength. Increased dice tray size. Removed texture on Dice tray. Increased thickness of dice tray. Increased doorway for smoother dice exit. Removed details surrounding side balcony.

Update 3.2! Increased the angle of the stairs to help dice generate more momentum, made base (dice tray) thicker, angled front steps out door better. flattened exit way.)

*This tower is still a work in progress. Please let me know if you have any issues or feedback. I'll continue working to improve it till it's perfect.

Print Settings

Notes:

No supports! Print it bigger if you want to use large dice!

This tower is still a work in progress. Please let me know if you have any issues or feedback. I'll continue working to improve this tower.

Category: Toys & Games

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License