Caravan Reversing Aid/Flag
Description
PDFWhen reversing a caravan it can be difficult to see when the back end starts to turn. This unit screws underneath the caravan and sticks out the sides and can be seen on the towing vehicles mirrors. The unit is in 2 pieces, the bracket and the flag which clips in to the bracket and can be easily replaced should they get break. The flags are in 3 lengths so the flags can be seen around wheel arches etc. You can also put more than one set on each side and the different length flags stop one set being hidden behind the other.
I printed the bracket in black and the flags in bright orange using PetG with a 0.2 layer height, 20% infill.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Any PetG Orange for Flags and Black for bracket
Notes:
When reversing a caravan it can be difficult to see when the back end starts to turn. This unit screws underneath the caravan and sticks out the sides and can be seen on the towing vehicles mirrors. The unit is in 2 pieces, the bracket and the flag which clips in to the bracket and can be easily replaced should they get break. The flags are in 3 lengths so the flags can be seen around wheel arches etc. You can also put more than one set on each side and the different length flags stop one set being hidden behind the other.
I printed the bracket in black and the flags in bright orange using PetG with a 0.2 layer height, 20% infill.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.