(Smaller) Less Thin Hexagon Parts Tray

This is remix of Steve's Less Thin Hexagon Parts Tray by reducing the size to 50% and keeping the original wall widths to 1.2mm.

Created to  to keep my desk nice and clean while modelling projects and measuring various small parts.

Recommended print settings

• Extrusion width: 0.4mm, forced
• Layer height: 0.2mm
• Walls: 4
• Infill percentage: Any (will print as walls only)
• Solid top/bottom layers: 5
• Supports: None.

Filaments:

• Any of your choice, PLA will be fine enough

• Size factor of 0,5 (50%), keeping wall width at 1.2mm
• 5mm and 7,5mm height
• Radius changed for smaller part junction with taller to make model visually more appealing