Pennywise (HueForge)
HueForge created print of Pennywise from IT.
In the contest Halloween
18
98
3
488
updated
October 7, 2023
Description
PDFCreated using HueForge. If you resize, do not resize Z height, otherwise layer change settings will be incorrect.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ IIID Max Red Transmission Distance: 5.5
PLA+ IIID Max White Transmission Distance: 7
Filament Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #10 (0.88mm) swap to White for the rest.
Model origin
The author marked this model as their own original creation.
