Bullion Box

After i started to invest in gold i wanted a box to organize in my safe. I went for a wood box type construction with rabbet joints and corner shields. I printed all the body parts with a .3 layer height and .2 for the corners, latch and hinge.

The hinges are two pieces of the same part jointed with M2.5 screws. M2.5 is also the only size needed all screws for the assembly are of that dimension.

for attatching the hinge and latch you may need to cut the screws down. Mount the latch and hinges to the long sides before assembling the body and the lid.

I also uploaded an instructional video to my Youtube channel:

As usual i declare the design public domain, any attribution is greatly apreciated but not needed (because demanding it would be hypocritical on my end).