Emisar and Noctigon flashing kit cover for D4v2, KR4 and more

Small protective box for the flashing kit for Emisar and Noctigon flashlights. Should also work for other USBASP flashers.

Might require a bit of fitting on the USB connector's hole, I manually enlarged it a bit using a knife, purposefully made it slightly undersized so that the board can't fall off normally. The top cover is friction fit but can be glued with a drop of super glue on the edge to keep it from ever falling off, or wrapped in tape.

Makes it easier to safely plug in whenever a new version of Anduril releases.

Might look cooler in translucent plastic, should be trivial to remove the witness hole in the source file.

Designed using FreeCAD 0.18

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

20%

Filament: Esun PLA+ Doesn't matter

Notes:

Printed at 70mm/s, might look better if printed slower.

Category: DIY