Planet Express Lighted Logo Futurama

This is a lighted Planet Express logo that I made. See part list below for best settings. Enjoy!

USB powered lights used can be purchased from Amazon at the link below. I only used a small part of one of the strands for this project which means more lights for more projects!

The inside diameter will only take about two feet.

https://www.amazon.com/gp/product/B08M65DKZ7/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Notes:

Planet Express logo Frame – This is printed with lettering on the bed.

Planet Express logo Back – Printed with two layers white and three layers black. The White reflects the LED light out the front and the Black will keep the light from leaking out the back of the sign.

Planet Express logo Red Inner Ring – Two layers in Red. I used the Hilbert Curve in Prusa-Slicer on the top layer because it gives a nice matt look to the face and diffuses light well.

Planet Express logo Ship Neon Green - Two layers in Neon Green. I used the Hilbert Curve in Prusa-Slicer on the top layer because it gives a nice matt look to the face and diffuses light well.

Planet Express logo White Outer Ring - Two layers in White. I used the Hilbert Curve in Prusa-Slicer on the top layer because it gives a nice matt look to the face and diffuses light well.

Planet Express logo Stand – Black