5.25" Half Height Bay Gotek Floppy Emulator Bracket

5.25" Half Height Bay Gotek Floppy Emulator Bracket that fits an OLED (either 28mm or 26mm wide PCB). Includes bezel and non-bezel versions.

Space for a rotary encoder & 0.96" 128x64 OLED display which just slides into place and holds well.

v2 is 2mm deeper/longer as I found two versions of the 5.25" half height specifications on the web so need to test further.

• After printing v2 it is too short for modern PC cases, so a new version for these cases has been added. This version the holes are 52.75mm from the front, basically added 5mm for the bezel. I recommend this version unless you know your case is shorter
• Added a new version with two sets of holes on the side to help with case mounting
• Added another new version with a front panel Bezel (sides only)
• v2 Bezel added, no extra width and slightly thicker for better printing

*Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that print which I'll update if I print on my new Prusa MK3S+