USB2DB15 Case

This is a snap case for the USB2DB15 PCB by Raph_friend.

There are a few other cases out there, including an official one, which you can find on the USB2DB15 forum thread at https://www.arcade-projects.com/threads/open-source-usb2db15-for-supergun-adapter.14205/

For this particular case, I wanted to make sure that the USB port has ample clearance, and I wanted the wall thickness of the PCB case to a very narrow .9mm, which is required to fit 2 of these PCBs onto Frank_fjs' Minigun Supergun.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

20% Grid

Filament: Anything decent PETG or PLA Doesn't matter

Notes:

PETG is recommended over PLA for heat resistance.