100mm x 123mm (Smaller one)
Base layer 0.16mm and 0.08mm for the rest.
Layer change at:
Polymaker Charcoal Black at 7# (0.64mm)
Polymaker Fossil Grey at 12# (1.04mm)
Polymaker Cotton White rest of the print
===============================================================
===============================================================
195mm x 240mm (Bigger one)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Start with Charcoal Black
At layer #5 (0.48mm) swap to Fossil Grey
At layer #11 (0.96mm) swap to Cotton White for the rest.
The author marked this model as their own original creation.