MKS emmc Adapter Case

This Case is for the MKS emmc Adapter V2.0
https://www.aliexpress.com/item/1005005614719377.html

There are two different variations for the top. 
One with hole for the LEDs and one without hole.
With hole is: mks_emmc_adapter_top2.STL
Without hole: is mks_emmc_adapter_top.STL
The bottom part is the same for both.

Update 11.2024:
New is a tiny reverse protector that can be glued to the top side when needed. It prevents the insertion of the eMMC module in the wrong direction.

Don't print it too fast.
My settings:
1st Layer 30mm/s
everything else 60mm/s