Tilted Guitar Amp Stand
Tilted stand to direct a guitar amps output to the player
32
140
1
725
updated November 13, 2023
Description
PDFA simple stand for guitar amps or similar.
The cross brace provides some extra stability, but you can also use it without.
When using the cross brace, you will get 200mm spacing between the two feet. This will result in 300mm width for the assembled stand. You wanna make sure this will not collide with the rubber feet underneath the amp.
Printed mine with 2 perimeters and 10% infill, it was sturdy enough to hold a Orange Crush 35RT.
*Update: Added addtional cross brace lengths, 225mm, 250mm, 275mm. If you need any other length, please let me know.
Tags
Model origin
The author marked this model as their own original creation.
