ISIS logo from Archer TV show - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Marine Blue
At layer #11 (0.96mm) swap to Marine Blue
At layer #15 (1.28mm) swap to White for the rest.