medium door for Ikea Gnedby

medium door for Ikea Gnedby

as a hinge you will need a 4mm rod 

I added to each door space for 2 4mm magnets 

a spacer for the placing of the magnets in the gnedby

and a spacer so that all hinges can be placed at the same place 

the knob can be printed separately and then glued to the door there is also a template so that alle the knobs can be placed at the same position

this is in multimaterial so you have to split the stl in prusaslicer into parts and then print as you like if you dont have an mmu you can check this tutorial: